HomeOUR PRODUCTS → Oli Lock

The «OLI LOCK» seal has strong temper evidence features and belongs to indicative wire seals. Due to its additional blocking element all the component parts of the seal are protected against removal from the housing.

Oli Lock

Domains:

Colors:

The «OLI LOCK» seal has strong temper evidence features and belongs to indicative wire seals. Due to its additional blocking element all the component parts of the seal are protected against removal from the housing.

Order now Request samples

The advantages of the seal Oli Lock:

  • After the seal was closed, the extraction of separate component parts is possible only by complete destruction of the device. Any kind of manipulation with any part of the seal is impossible.
  • The installation does not require special equipment or abilities.
  • The rotation of the insertion is impossible after the latch had been closed.
  • The installation of a RFID chip is possible.
  • It is possible to print a linear barcode, a 2D Data Matrix code or a QR-code.
Technical Specifications
  • Material from which the housing is produced: SAN; the insertion, the latch and the interior plaque are produced of ABS material.
  • Flexible galvanized cable with a diameter of 0.6-0.7 mm. The standard cable length is of 250 mm. At the customer’s request the seals can be delivered with stainless steel cable or plastic coated steel cable.
  • Dimensions: 30х33х12 mm.
  • The weight at standard cable length – 5 gr.
  • Operating temperature range: from -40°С to +50°С
  • In the process of molding, the name of the producing company “Olimp” and the year of production are printed on the housing surface.
Marking
  • Standard marking (laser marking): it is possible to print an inscription in 3 lines with 5, 7 and 5 letters correspondingly in each row on the front side; On the back - a 7-digit number and 2 rows of 5 characters each. Instead of the inscription, it is possible to mark or to print the logo of the customer’s company.
  • The number marking can be performed in 4 ways on the «OLILOCK» seal:
    1. Marking the number only on the latch;
    2. Marking the number on the latch and the housing;
    3. Marking the number on the latch, housing and on the insertion;
  • It is possible to print the barcode on the housing. When marking the barcode, the transparent housing will be replaced with a housing of white color.
  • It is possible to print a 2D Data Matrix code or a QR-code.
Packaging
Seals are packed in plastic bags of 100 pieces each, then in cartboard boxes of 1000 pieces each. Weight of one box: 5, 65 gr.
Installation rules
  • Insert one end of the cable into the hole of the seal, and turn its insertion to secure the cable. Then pull the other end of the cable through the hole of the object to be sealed and then through the other hole on the housing of the seal.
  • The cable should be pulled by hand through the hole until the loop between the seal and the object to be sealed shrinks up to 4-5 mm.
  • To block it, it is necessary to turn the insertion clockwise not less than 3 times.
  • It is recommended to stop the insertion strictly either vertically or horizontally.
  • Insert the latch into the housing to the end and break the prominent part of the insertion. The installation is complete.
Certification
   
Protection of intellectual property

This seal is protected by the following patents:

  • Eurasian patent Nr. 015522
  • Invent patent (Ukraine) Nr. 94520
  • Certificate of trademark registration Nr. 21067
  • Invention patent (Moldova) Nr. 4034