HomeOUR PRODUCTS → Garda N2

«GARDA-Nr.2» is a modified version of the seal ”Garda-N”, designed for sack sealing. It is classified as a high security seal.

Garda N2

Application:

Colors:

«GARDA-Nr.2» is a modified version of the seal ”Garda-N”, designed for sack sealing. It is classified as a high security seal.

Order now Request samples

The advantages of the seal Garda N2:

  • The installation does not require special abilities or equipment.
  • All the inscriptions are covered with a plastic layer which excludes the possibility of modification or manipulation.
  • In the manufacturing process, the housing parts are welded by ultrasonic welding in a monoblock, which eliminates any opening or other manipulations without damaging the seal or leaving evidence of tampering.
  • A special window allows to check visually the fulfillment of the installation of the seal.
  • The seal is equipped with an original locking mechanism securely holding the rope.
  • A large area available for marking offers an extensive possibility to customize the product by applying color customer logo, barcode, 2-D code and a large amount of text.
  • The installation of a RFID chip is possible.
  • The seal is organic and anti-inflammatory.
  • The seal is equipped with an additional element with spikes, which dig into the sack at installation, and allow you to securely seal the sack.
  • The width of the spiked tape prevents the seal from rotation and twisting off the seal without leaving any visible evidence of tampering.
Technical specifications
  • Used material: ABS.
  • Flexible galvanized cable with a diameter of 1.5 mm. The standard length of the cable is of 350 mm, but it can be increased on customer’s request. Stress at break of the cable is not less than 1500 N.
  • Dimensions: 66,5х37х13 mm.
  • Weight at standard length of the cable: 26 gr.
  • Resistant to climate change. Operates continuously at temperatures from -40 ° up to +50 ° С.
Marking
  • As a standard model, it is possible to print a number of 7 digits on both sides of the seal.
  • On the front side there should be printed the logo or the emblem of the customer’s company (with laser marking or pad printing).
  • All information fields are protected by a transparent plastic cover.
  • It is possible to print a linear bar code, a 2D code, a Data Matrix or a QR-code.
Packaging
The seals are packed in plastic bags of 20 pieces each, then each 200 pieces in boxes. Weight of one box: 5,6 kg.
Installation rules
  • Plug the cable into the hole of the seal, thus forming a loop; gather the end of the sack in one hand, twist it a little and put the loop on it, then pull the cable to the end.
  • Break the cover plate and twist the insertion until it stops. You shall see the end of the insertd cable through the inspection window. Break the prominent part of the insertion.
  • Check the quality of the installation by trying to manually open the seal.
  • The installation is complete.
Certification