HomeOUR PRODUCTS → Scut

The control and sealing device "SCUT" is a plastic indicative cable seal. Due to its small size and convenient price, the “SCUT” sealing device can be used in many different areas.

Scut

Domains:

Colors:

The control and sealing device "SCUT" is a plastic indicative cable seal. Due to its small size and convenient price, the “SCUT” sealing device can be used in many different areas.

Order now Request samples

The advantages of the seal Shield:

  • It is a single-use seal.
  • Easy installation without pliers.
  • It is impossible to open the device without leaving tell-tale evidence of tampering.
  • The transparent housing allows to verify the proper installation and the safety of the seal.
  • The interior mechanism turns only in one direction, which guarantees the impossibility to extract the cable after the installation of the seal.
Technical specifications
  • Housing material: PET, the insertion is made of polystyrene.
  • Flexible galvanized cable with the diameter of 0.6-0.7 mm. At the customer’s request the seals can be delivered with stainless steel cable or steel cable with plastic coating. The standard cable length is of 250 mm. It can be increased at the customer’s request.
  • Dimensions: 22х24,5х15,4 mm.
  • The weight at standard cable length – 3 gr.
  • The seal is resistant to climatic changes, it continues to function at temperatures from -50°С to +50°С
Marking
The inscription on the seal is made by a laser machine and consists of a 7-letter inscription and a 7-digit number. Characters height - up to 2,5 mm. On a special request it is possible to print a 11-letter inscription, with the height of the characters of up to 2 mm.
Packaging
The “SCUT” sealing devices are packed in plastic bags of 100 pieces each and then in cardboard boxes of 1000 pieces each. Weight of one box at standard cable length: 3,65kg.
Installation rules
  • The free end of the cable shall be inserted into the holes of the object to be sealed, and then into the holes of the housing of the seal.
  • The cable should be pulled by hand through the hole until the loop between the seal and the object to be sealed shrinks up to 4-5 mm.
  • To block it, it is necessary to turn the insertion clockwise not less than 3 times.
  • After that, the projecting part of the insertion is broken off and the installation is considered finished.
Certification